Reg. Price
$ 9.99
Sale!
9.99
* Discount only for limited time, Buy it now!
"This Best Selling Car Phone Mount, C-HOLD Air Vent Universal Car Mount,Car Phone Mount Holder,Cell Phone and Iphone Car Mount Holder with 360° rotate for iPhone 6s Plus,Samsung,GPS and More Smartphone Black Tends to SELL OUT VERY FAST! If this is a MUST HAVE product, be sure to Order Now at Amazon.com to avoid disappointment!"
Car Phone Mount, C-HOLD Air Vent Universal Car Mount,Car Phone Mount Holder,Cell Phone and Iphone Car Mount Holder with 360° stagger for iPhone 6s Plus,Samsung,GPS and More Smartphone Black
- Compact light weight comparing to normal stands. Small size but rich-function.
- Single-handed Operation. Simple designation and dismissal of intelligent phones, effortless. No more con putting your phone or device on the automobile phone mountain .
- Enhanced Security. Special pattern uses a open shave arm in one side to raise confidence of mobile devices, keeps from slipping down.
- The tall peculiarity rubber retaining pattern of the shave maximizes attrition to revoke probable slippage, so the bottom of the mountain stays bound in the air opening of your car, on condition that solid await for your phone even when you are pushing on a rough road.
- Easy Adjustment. It’s expandable firmly binds most smartphone (3.5″~5.7″ phone).
Rotates 360 DEGREE easy switch in between mural and landscape mode.
Thanks to the singular Rotating UniFlex Ball, the automobile phone mountain can be easily practiced to any point of view for your observation pleasure. Fully tractable for optimal observation angles.
FITS ANY DEVICE UP TO 5.5″ WIDE Screen
The tractable Sizing Braces concede for probably any phone or unstable device up to 6.0″ far-reaching screen, to be firmly mounted.
Soft Cushion Grip hugs your phone parsimonious and secure!
Incompeletely Compatible List
–Apple iPhone 6S/6S Plus/6/5S/5C/5/4S,
–Moto G 2014, Moto X 2014,
–Samsung Galaxy S6 Edge/S6/S5/S4/S4 Mini/S4 Active, S3/S3 Mini,
–HTC One M9/M8/M7/S/X/V,
–LG G3/G2/LG G Flex,
–Blackberry Classic/Z30/Z10/Q10,
–Nexus 5/4,
–Sony Xperia Z/S/U/P,
–Nokia Lumia 1520/1020/929/928/925/920/820/720/635/520.
Outstanding Design:
* Compact light weight comparing to normal stands. Small size but rich-function.
* Single-han
List Price: $ 9.99
Price: $ 9.99
|
|
|
|
|
|
|
What customers say about Car Phone Mount, C-HOLD Air Vent Universal Car Mount,Car Phone Mount Holder,Cell Phone and Iphone Car Mount Holder with 360° rotate for iPhone 6s Plus,Samsung,GPS and More Smartphone Black?
![cellphoneage® [Prime]For iPhone 5 5G Black Full Set with Spare Parts LCD Screen Replacement Digitizer with Home Button, Bracket, Flex, Sensor, Front Camera, Frame Housing Assembly Display Touch Panel + Free Repair Tool Kits [Ships from USA]](http://www.iphonegears.com/wp-content/uploads/2016/03/51eBpRqtgFL._SL160_-1.jpg)
Hot Deals!
      |
Popular Products
- 4.7″ ONLY!!! iPhone 6, iPhone 6S case, protective Apple cover, crystal clear, Soft Gel Plating TPU Case, FS 0413 Phone Case (Gold)
- iPhone 6s Plus Case, iPhone 6 Plus Case, Pvendor 5Pack Slim Smooth Premium Durable Soft TPU Rubber Silicone Gel back Case Cover for iPhone 6 Plus (2014) / 6s Plus (2015)-Black/White/Blue/Pink/Rose
- iPhone 6 Case, Anole® Ultra-thin 3 in 1 Anti-Scratch Anti-fingerprint Shockproof Resist Cracking Electroplate Metal Texture Armor PC Hard Back Case Cover & Skin for Apple iPhone 6 4.7 Inch (Black)
- New Replacement Rear Glass Back Cover Battery Door For iphone 4 4G A1332 (Black) + 1 Screw Driver, 2 Pentalobe Screws, and 1 Screen Protector
- Case for iPhone 6 6S,Cotowin [Black] Matte TPU Soft Case Cover for iPhone 6 & iPhone 6S 4.7-Inch
Online Shops
Nice, simple, easy to use air vent cellphone holder!,
Description:
For the short review, skip down to the pros and cons section. This is the long review… This is the C-HOLD universal air vent cellphone holder. I purchased the black one. The phone holder mounts to an air vent lattice with a non-slip jaw. This jaw secures the holder flawlessly to the vent. This jaw is tightened with a wing nut type fastener (see pictures). The cradle part of the holder can rotate 360 degrees and tilt up and down about 25 degrees in both directions, so that you can position and orient your cellphone any way you want. I found it very adequate and easy to orient my phone in the position that I wanted. When you get the holder in the position you want, you lock it in place by tightening the rotating collar that is between the vent jaw and the cradle (see pictures). The cradle’s jaw (where your phone goes) dimensions are as follows: closed – 5cm wide; open – 8.9cm wide; jaw depth – about 5/8”. The cradle’s jaw is opened and closed with a spring loaded jaw slide mechanism. The jaw is easily opened with one hand, but it is easier to use both hands when putting the phone in the cradle jaw. Overall quality of the whole unit is very good and seems well made, it’s very sturdy. All the mechanical parts of the unit function flawlessly and with ease. The grip pads on the jaws work very well and my phone doesn’t budge. I have a Motorola Droid Turbo 2 and an Iphone. The Turbo is fairly large phone, and I have it in a fairly large case. With my phone there’s not a lot of room left in the cradle, both width wise and depth wise. I was afraid that the cradle jaws may not be able to hold on to my phone, but I was wrong…I took an eight hour trip with my phone in this holder and it never even hinted that it was going to fall out. Smaller phones won’t have any problems at all. Be sure and check your phone dimensions so that it will fit in this cradle. Setting up the holder is quick and easy. My only complaint is that when using this holder, an air vent gets partially blocked. If you get creative and mount the holder either on the very top or very bottom of the vent, and then mount your phone in the cradle to the very top or very bottom, you will decrease the amount of the vent that will be blocked. Another plus is that with most phones, the charge / headphone ports will not be blocked by this holder so you can plug those in and not worry about them.
I’ve included some pictures for you to look at, hopefully they will be helpful to you. Here’s some pros and cons for you to consider.
Pros:
–Very well made with quality materials.
–Easy to use and set up…set up was very quick for me which makes it easy to move from car to car if you need to.
–One handed operation is possible, but using both hands is easier.
–Grip pads on cradle hold phone very securely.
–Cradle can rotate 360 degrees and tilt up and down about 25 degrees in both directions, this allows you to position and orient your phone any way you want.
–No glue and no suction cups to mess with (which are a pain to use)…this holder clamps securely onto a vent lattice with a tightening jaw. This jaw has rubber grip pads that hold it securely to the vent lattice.
–Cradle is 5cm wide closed, 8.9cm wide open (max), about 5/8” deep. This will easily accommodate most phones. Mine is a Droid Turbo 2 in a large case, and it fit well.
Neutral:
–Depending on how you mount the holder / cellphone, it will partially block a vent. But, if you get creative (read above) you can position the holder and cellphone so that the vent blocking will be minimized.
–No mention of a warranty.
Cons:
–None at this time, I’ll update later if something arises.
Final thoughts:
I’m more than happy with it, actually…I’m very impressed. If anyone is looking to buy one, I would definitely recommend this one.
Only time will tell how well it holds up to every day use. I’ll update my review later to reflect this, after using it for a while longer.
Disclaimer: This product was received either at no or low cost for review, inspection and testing purposes. No compensation for a positive review was provided. All of my reviews are based 100% off of my experience with the product and I never guarantee a positive review. If I don’t like or have an issue with a product, I’ll tell you. I hope yall enjoy!
0
Was this review helpful to you?
|Compact but STRONG,
I recommend this product for anyone especially a person who use his/her phone for GPS or maps.
Benefits:
+ Compact light weight comparing to traditional stands. Small size but rich-function.
+ Single-handed Operation. Simple installation and removal of smart phones, effortless. No more hassle putting your phone or device on the mount.
+ Enhanced Security. Special design uses a spring clip arm in one side to enhance security of mobile devices, keeps from slipping down.
+ The high quality rubber gripping design of the clip maximizes friction to reduce possible slippage, so the base of the mount remains fixed in the air vent of your car, providing steady support for your phone even when you are driving on a bumpy road.
+ Easy Adjustment. It’s expandable securely holds most smartphone (3.5″ to 5.7″ phone).
iPhone Car Mount Holder, C-HOLD Air Vent Universal Car Phone Mount – Cell Phone Car Mount with 360° rotate for iPhone 6s Plus,Samsung S8 Edge, GPS and More Smartphone
Note: I received this product at a discounted price in exchange for my honest and unbiased review. This review is 100% my own and the cost has nothing to do with my review. However, your own opinion might vary. I received no monitory compensation and I am not required to give a good review that didn’t deserve it.
0
Was this review helpful to you?
|PERFECT,
Usage: Product works very well, and i have not experienced any issues while testing it. It is constructed well enough to last a very long time without breaking. Very happy with Performance .
Random Thoughts: I am learning that things don’t last like they used to so I am interested to see how long this product can last.
I received this product at a slight discount from the manufacturer in order to give an honest and accurate review. I am a real 22 year old college student so If there are any questions I can answer about the product please ask and I would be happy to help.
0
Was this review helpful to you?
|