Reg. Price
$ 15.99
Sale!
6.99
* Discount only for limited time, Buy it now!
"This Best Selling Mpow Grip Magic Air Vent One Step Mounting Magnetic Car Mount Holder for iPhone 6/6S and Android Cellphones Tends to SELL OUT VERY FAST! If this is a MUST HAVE product, be sure to Order Now at Amazon.com to avoid disappointment!"
Mpow Grip Magic Air Vent One Step Mounting Magnetic Car Mount Holder for iPhone 6/6S and Android Cellphones
- Powerful Magnetic Force: Reinforced captivating hilt can capture and reason most cellphones in the marketplace (big phones/phablets excluded).
- Dual Compound Mode: You can reason your phone with Mpow mount, the steel image and your phone case, or you can just do it with Mpow mountain and the supposing glue steel plates.
- Sturdy Base: Regardless of highway vibrations or impacts, the rubberized bottom can reason your phones in place, not falling.
- Arbitrary Swivel: No make a difference how you stagger your phone, this Mpow mountain hilt guarantees that your phones will sojourn in your elite position.
- Cradle-less Design: No Cradle, No Bracket, No Clamp, only the captivating force can safeguard a reserve operation.
Operation has never been easier! Effortless Installation
Just pull the Mpow mountain hilt into the air vent, it will get stranded firmly. Then the stout rubber bottom and absolute captivating conduct can reason your smartphone safely. 360 Degree Swivel
Innovative ballhead building a whole allows you to fast regulate to optimal point of view in 360 degrees. No Blind Side. Simple Usage Modes
1. Place the steel image in between your device and the case, then your phone(with the case) will “hang” on the holder;
2. Stick the glue steel image without delay on the back of your phone, still, it will be captivated intensively by Mpow Grip Magic. Dual Setting Clip
Mpow’s automobile mountain offers two density settings to safeguard a secure fit onto your air vent. One is for skinny air opening blade, the other is for thick air opening blade. More Than A Holder
Mpow Grip Magic Air Vent Mount Holder can also be used as a kickstand to reason the device in place on a prosaic surface. !NOTE
1. This automobile mountain might not fit
List Price: $ 15.99
Price: $ 6.99
|
|
|
|
|
|
|
What customers say about Mpow Grip Magic Air Vent One Step Mounting Magnetic Car Mount Holder for iPhone 6/6S and Android Cellphones?
![iPhone 6 Plus / 6s Plus Case, ESR [Shock-Absorption] TPU Bumper +[Scratch Resistant] Hard Clear Back Cover [Slim Fit] [Crystal Clear] Hybrid Case for 5.5 inches iPhone 6s Plus / 6 Plus (Clear)](http://www.iphonegears.com/wp-content/uploads/2016/03/51MhS9ob3QL._SL160_-1.jpg)
Hot Deals!
      |
Popular Products
- 4.7″ ONLY!!! iPhone 6, iPhone 6S case, protective Apple cover, crystal clear, Soft Gel Plating TPU Case, FS 0413 Phone Case (Gold)
- iPhone 6s Plus Case, iPhone 6 Plus Case, Pvendor 5Pack Slim Smooth Premium Durable Soft TPU Rubber Silicone Gel back Case Cover for iPhone 6 Plus (2014) / 6s Plus (2015)-Black/White/Blue/Pink/Rose
- iPhone 6 Case, Anole® Ultra-thin 3 in 1 Anti-Scratch Anti-fingerprint Shockproof Resist Cracking Electroplate Metal Texture Armor PC Hard Back Case Cover & Skin for Apple iPhone 6 4.7 Inch (Black)
- New Replacement Rear Glass Back Cover Battery Door For iphone 4 4G A1332 (Black) + 1 Screw Driver, 2 Pentalobe Screws, and 1 Screen Protector
- Case for iPhone 6 6S,Cotowin [Black] Matte TPU Soft Case Cover for iPhone 6 & iPhone 6S 4.7-Inch
Online Shops
Amazing phone holder. Holds my Note 4 up on the vent and looks like a small TV!,
0
Was this review helpful to you?
|perfect simple solution to hold phone in car,
There is no need to have a sticky gel pad. All I need, were to put the magnetic pad in between my case and my phone. I then just snapped the phone on the Mpow car mount with ease. The magnetic field just holds my phone strongly.
This is really an easy solution to hold the car without the need of windshield or dashboard. All I need is the car’s air vent. I tried on Nissan Rogue 2011, Mini Cooper and a Camry. I had no problem mounting this Mpow car mount on their air vent.
One last cool thing about this Mpow car mount which is that I can also be used as a phone/tablet stand. I can easily use it to stand my giant phone. This is so cool to watch movie/youtube and read manga.
This Mpow car mount is great, but I think it is good for summer. In the winter, if I run the heat, I am sure it will hot up my phone so much. When I use the air vent to hold the phone, I also feel I sacrifice a slot for the cool A/C flow. Keep these 2 things in mind. Other than those, this is a great car mount. It has good strong perfect grip. It works on my giant phone, should it work on any other phones as well.
0
Was this review helpful to you?
|Does what it’s supposed to do, and does it quite well!,
I have the mount as shown in the image above. Mine is the magnet style with the vent clip, not the CD slot variety. I was provided with this product for test and evaluation purposes. With that said, If I don’t like a product, I’m going to give it a bad review, even if that means my relationship with the vendor might be terminated! Morally I’m obligated to the Amazon public, and not to a vendor!!! Just wanted to get that out of the way.
I’ve had the mount for about two weeks now and I’ve used it daily in two different vehicles… a Honda CR-V, and a Nissan Rogue. It works better than anticipated in both. I say that as to look at the product, there’s not much to it. It’s simplicity itself.
Mine came with the magnetic, vent mount, and 2 metal plates. The magnetic part is rubber covered on both the front and back. There are four tapered protrusions that extend back from the magnet that slide in between the louvers on your dash vents. I’ll call these “fingers” from here on. These fingers are rubber covered and a cross between being flexible and being rigid. The rubber is flexible in that it will deform to fit between the louvers, but the inner core is more rigid to keep the device from flopping around when mounted. There are two different spacings between the fingers. One quite narrow, and the other a bit wider. I needed to use both spacings as both the louver thickness, and the distance between louvers varied greatly between the Honda and the Nissan. On both cars, the mount held securely with no concern that it might fall out over bumps. I was concerned that the secure fit might deform the cars’ louvers, but that did not happen. I placed it, and it stayed put. Just because I can’t leave well enough alone…, I opened the mount up to see what was inside, and it appears that MPOW is using 4 circular neodymium magnets inside. Neodymium magnets are probably the strongest commercially available magnets out there!
The mount was supplied with 2 metal plates. One was 1.5″ circle with peel and stick tape affixed to one side, and the other was a rectangular plate slightly larger than the circle, and without any tape on either side. Both plates were quite thin, maybe 1/64″ thick, but surprisingly quite rigid, and not likely to bend.
The phone I tried this on is a relatively large heavy device, an LG Optimus G Pro, 5.5″ screen, basically the same size as a Samsung Galaxy Note, or what would be referred to as a “phablet”, The phone resides in a 2 layer TPU rubber and hard plastic case, and it has a tempered glass screen protector affixed. So, this makes a large heavy phone even larger and heavier!
At first I tried the magnet against the back of my phone (without using a metal plate) to see if it would have enough pull to stick onto the phone’s battery, through the phone’s plastic backing It grabbed, but not sufficiently for use. I placed the metal plate directly against the battery and tried again, but not too much different in results. As it was, the magnet would have to go through 3 layers of plastic and rubber to reach the battery. I tried the metal plate inside the phone, and outside the phone, but still inside the case, and it worked, but I was still a bit nervous about the grip. It would have worked, but I wanted 110% surety. I ended up using the round metal plate with its sticky tape, affixed to the outside of my TPU/plastic protective case. Stuck on the back of my case, the plate protrudes just a bit more than 1/64″. We’re talking maybe the thickness of 4 or 5 “post-it Notes. It’s quite flat and unobtrusive! When placed against the magnetic mount it sticks unbelievably well!!! It’s not coming apart until you PULL it apart.
I was concerned as to whether a piece of metal at the back of my phone might interfere with signal strength, but I experienced no loss of signal. I was also concerned as to whether this piece of metal which was now slightly covering my NFC area would have any negative aspects on the phone’s ability to transfer music via near field communication (NFC), or charging with a Qi charger, but again no issues. Keep in mind though that this is with my very large phone, and I cannot say with certainty that it might not be different with a smaller phone and with the metal plate covering a greater amount of your NFC coil (if your phone even has that installed…iPhones earlier than the 6 don’t have NFC, so it’s a non-issue for those).
My only real concern, and a possible negative, has nothing to do with the product itself…
The vents on the Nissan are quite short in height! They are actually shorter than the height of the mount. This causes the circumference of the magnet to rest a bit upon the trim that surrounds the vents. After some time, I’m going to make the assumption that the mount will vibrate against the trim, causing the trim to either scratch or lose its finish…
Read more
Was this review helpful to you?
|